广告招募

当前位置:欧亚贸易网 > 技术中心 > 所有分类

安全滑触线的使用常识

2025年03月23日 19:15:28      来源:扬州市昂立电气有限公司 >> 进入该公司展台      阅读量:1

分享:

安全滑触线:是一种**移动供电装置,以其绝缘、安全、耐温、抗振、节能等性能逐步替代了旧式裸露角铁及铜排滑触线。安全滑触线由填嵌在工程塑料型管或槽板中的光滑平整的T2铜排或嵌有耐磨导体的铝型材作为载流体,组合成输电导管,导管下有开口槽以利集电器运行,并由集电器的高耐磨铜基石墨电刷将电力导向工作电器。
Safety sliding contact line is a new type of mobile power supply device, to the insulation, safety, high temperature resistant, anti vibration, energy saving etc. superior performance gradually replace the old bare iron and copper sliding contact line. Safety sliding contact wire by filling block in engineering plastic tube or a channel plate smooth of T2 copper and inlaid with wear conductors of aluminum as the carrier fluid and combined transport conductance tube and catheter with open slot to set the operation of electrical equipment, and the electric force directed electrical work by the collector of high wear-resistant copper matrix graphite brush.
安全滑触线的使用为车间带来了安全,但也有缺点,桥式起重机在使用中易断电,有时在输电导管内产生火花,严重时滑触线某放炮",造成集电器更换过于频繁,影响生产。
Safety sliding contact wire used for the workshop to bring security, but there are also disadvantages, bridge crane in use easy off, sometimes in the transmission conduit sparks, serious when slide contact wire of a shooting ", resulting in electrical appliances to replace the too frequent, affect the production.
为此,进行了如下改进:
To this end, the following improvements are made:
(1)增大集电器电刷倒角,并打磨光滑;
(1) increase the collector brush chamfered, and polished;
(2)增加集电器两相对电刷间弹簧强度、弹性,保证弹簧恢复自如;
(2) an increase of two relative to the electric brush spring strength and elasticity of the collector to ensure that the spring restores freely;
(3)加深。加固集电器中的弹簧座,保证电刷的恢复弹簧在工作中不易"串位";
(3) deepen. Strengthen the spring seat in electrical appliances, to ensure that the recovery of the brush in the work of the spring is not easy to "string";
(4)两段安全滑触线连接处连接块要有倒角,保证集电器平滑过渡。同时,为保证安全滑触线的正常使用,行车工的规范操作、维修工的定期保养、定期检查也。
(4) two security trolley line connected to a block chamfer, to ensure a smooth transition in appliances. At the same time, in order to ensure the normal use of the safety slip contact line, the operation of the standard operation, maintenance, regular maintenance, regular inspection is also essential.
版权与免责声明:
1.凡本网注明"来源:欧亚贸易网"的所有作品,版权均属于兴旺宝装备总站,转载请必须注明兴旺宝装备总站。违反者本网将追究相关法律责任。
2.企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
3.本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。 4.如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系。

[{"ID":"296949","Title":"滑触线应注意的事项分析解读","OrderField":"Prev"},{"ID":"296951","Title":"角钢滑触线与安全滑触线的区别","OrderField":"Next"}] $item.OrderField