IEC60335 Test probe detection handheld agitator safety
In line with IEC60335-2-14 Clause 20.102, GB4706-30 Clause 20.102 and other standard requirements, is to detect whether the handheld blender blade is completely concealed from the above, and can not touch the plane when rotating.

IEC60335 Test probe detection handheld agitator safety
Technical parameter

IEC60335 Test probe detection handheld agitator safety
Test method
The test probe of 8mm diameter should contact the blade at any position 45 “above the blade. The probe should not be touched.

GB4706-30 Safety of household and similar electrical appliances – Particular requirements for kitchen machinery Clause 20.102. The blades of hand-held agitators shall be completely shielded from the top and shall not touch the flat surface when they are rotated. Its conformity is checked by visual inspection and test with a cylindrical rod at any position between an Angle 45 “perpendicular to the upper edge of the stirring blade. The rod is 8.0MM in diameter and 0.1MM in length.
The end of the rod should not touch the blade.

IEC60335 Test probe detection handheld agitator safety
Technical parameter
Diameter: medium 8mm, length :80mm, with handle

IEC60335 Test probe detection handheld agitator safety
Test method
The test probe of 8mm diameter should contact the blade at any position 45 “above the blade. The probe should not be touched.

GB4706-30 Safety of household and similar electrical appliances – Particular requirements for kitchen machinery Clause 20.102. The blades of hand-held agitators shall be completely shielded from the top and shall not touch the flat surface when they are rotated. Its conformity is checked by visual inspection and test with a cylindrical rod at any position between an Angle 45 “perpendicular to the upper edge of the stirring blade. The rod is 8.0MM in diameter and 0.1MM in length.
The end of the rod should not touch the blade.