Round Baffle Test Finger
Food Stirrer stability test meter mechanical hazard test finger 125MM round baffle test finger
Meet the standard:
Made according to Clause 20 of GB 4706.3 using type B test rods similar to those in IEC61032 but with a round baffle with a diameter of 125mm
Instead of a circular baffle.
Food Stirrer stability test meter mechanical hazard test finger 125MM round baffle test finger
Product Overview:
A force not exceeding 5N is applied to the Type B test probe similar to 61032 to determine whether it is qualified. However, the test probe has a circular limit plate with a diameter of 125mm in place of the original non-circular limit plate. For appliances with removable devices such as changing belt tension, test probe tests shall be performed by setting these devices to an unfavorable position within their adjustable range. Remove the belt if necessary.
The test probe should not reach dangerous moving parts.
Food Stirrer stability test meter mechanical hazard test finger 125MM round baffle test finger
Meet the standard:
Made according to Clause 20 of GB 4706.3 using type B test rods similar to those in IEC61032 but with a round baffle with a diameter of 125mm
Instead of a circular baffle.
Food Stirrer stability test meter mechanical hazard test finger 125MM round baffle test finger
Technical parameters:
| Curved finger diameter | 12 mm | Length of bent finger | 80mm(total length of three sections) |
| Baffle diamete | 125mm | Handle length | 100mm |
| Reference standard | GB4706.1-2005 Article 8.1,1, IEC61032:1997 Figure 2, E60335-2-14, GB4706.30, etc |
Food Stirrer stability test meter mechanical hazard test finger 125MM round baffle test finger
Product Overview:
A force not exceeding 5N is applied to the Type B test probe similar to 61032 to determine whether it is qualified. However, the test probe has a circular limit plate with a diameter of 125mm in place of the original non-circular limit plate. For appliances with removable devices such as changing belt tension, test probe tests shall be performed by setting these devices to an unfavorable position within their adjustable range. Remove the belt if necessary.
The test probe should not reach dangerous moving parts.
所有评论仅代表网友意见，与本站立场无关。