IEC61032 test kit 11 no joint test finger

IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device

Product overview
Comply with IEC61032 Figure 7 test 11, GB/T16842 Figure 7 test 11, IEC60884, IEC60598, IEC60335, IEC60065, GB8898, GB7000, GB4706 and GB2099 standard requirements. It is used to test parts that are protected from human contact. It can also be used to test the mechanical strength of holes in the housing or the internal baffle of the housing.
Can be customized: equipped with wiring terminals for anti-shock test, or handle end open M6 thread hole (with push tension meter used) for shell protection test.

IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device
Technical parameters:

IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device
How to use:
1, the test finger part can not touch live parts or dangerous parts, and 50mm-20mm baffle can not enter.

2. In the test requirements of preventing access to dangerous parts, thrust test directly refers to the need to apply thrust.

Product overview
Comply with IEC61032 Figure 7 test 11, GB/T16842 Figure 7 test 11, IEC60884, IEC60598, IEC60335, IEC60065, GB8898, GB7000, GB4706 and GB2099 standard requirements. It is used to test parts that are protected from human contact. It can also be used to test the mechanical strength of holes in the housing or the internal baffle of the housing.
Can be customized: equipped with wiring terminals for anti-shock test, or handle end open M6 thread hole (with push tension meter used) for shell protection test.

How to use:
1, the test finger part can not touch live parts or dangerous parts, and 50mm-20mm baffle can not enter.

2. In the test requirements of preventing access to dangerous parts, thrust test directly refers to the need to apply thrust.
​​​​​
​