2025年03月24日 15:09:34 来源：广州弘亚数控机械股份有限公司 >> 进入该公司展台 阅读量：4
预热板件，提升板材与边带的粘合效果。
Panel preheats to improve a better adhesiveness between panel and tapes.
采用双铣刀针对开料后产生的波纹痕迹、毛刺或者不垂直等现象，进行再次加工修饰，使得封边条与板材的贴合更加紧密，整体更美观。
Trim off the defects left on panel surface after cutting, thus achieving a close sticking and better edge results.
快换式上熔胶，拆换便利、快捷，胶锅液位高精仪器监测，自动预熔、抽胶粒。
Quick-change glue pot and glue level sensor-equipped, EVA glue pre-melts and automatically applies.
胶箱储量大，满足长时间供胶，减少人工加胶频率。
With the large capacity of glue box, it can satisfy the EVA long-time supply and reduce times in manual application.
强力压合边带，提高封边粘合效果。
Strongly pressure to improve adhesiveness.
将突出于木板上下表面多余边带切除，使封边带上下边缘与木板的上下表面平齐。
Trim excess edge off the panel top and bottom, to have a level and smooth edging results.
消除修边非直线运动切削过程引起的波纹痕迹，使板材上下部分更加光滑整洁。
Trim off the tools marks, ensuring the best edging quality.
配备定向吹丝功能，有效清除残余丝带。
Blowing system equips to clean off the strips /chips.
清除板件上下面的余胶和碎屑。
Remove excess glue and debris from the top and bottom of the board.
智能操作快捷方便。
标配5.5KW电机，开槽深度可达6*20mm。
5.5KW grooving motor, working depth up to 6*20mm.
