2025年03月24日 15:03:32 来源：广州弘亚数控机械股份有限公司 >> 进入该公司展台 阅读量：5
双上熔胶系统
[Double Pre-melts System]
快换式上熔胶，拆换便利、快捷，胶锅液位高精仪器监测，自动预熔、抽胶粒。
Quick-change glue pot and glue level sensor-equipped, EVA glue pre-melts and automatically applies.
胶箱储量大，满足长时间供胶，减少人工加胶频率。
With the large capacity of glue box, it can satisfy the EVA long-time supply and reduce times in manual application.
快速跟踪机构
[High Speed Corner-rounding]
采用高频马达修边电机，快速、稳定，对前后两端封边带，进行精准的仿形圆角修边。
High-frequency trimming motor applied, ensures a fast and stable chamfer trimming on corner edges.
数据采集对接端口
[Data Collection]
记录设备运行信息。
Real-time recording of machine operation information.
履带压料
[Belt-type Pressure Beam]
压紧接触面积大，确保木板高速输送的稳定性，提升封边品质。
A large contact area on the panel ensures a stable conveys with high speed, improving edging quality.
预铣机构
[Pre-milling Unit]
标配40mm铣刀(选配65mm)。
Standard with 40mm milling cutter (optional 65mm).
双铣刀修饰开料后产生的波纹痕迹、毛刺或不垂直等瑕疵，使封边条和板材贴合更紧密，提高封边效果。
Effectively mill off the defects left after cutting, ensuring a close sticking and improving edging results.
预热
[Pre-heating Unit]
预热板件，提升板材与边带的粘合效果。
Panel preheats to improve a better adhesiveness between panel and tapes.
两组五轮压贴
[Five-wheel Pressing]
强力压合边带，提高封边粘合效果。
Strongly pressure to improve adhesiveness.
双导轨齐头机构
[Double-Rail End Cutting]
快速切断板件前后多余边带，前后单独导轨配置，高效，快捷。
Fast cut off the recessives tapes in front&rear.
配备自动润滑系统，根据运行次数自动注油，确保齐头机构运行顺畅，提升使用寿命。
The lubricattem is equipped, and automatically works according to running times, ensuring smooth action and prolonging the service life.
往复式抛光
[Buffing Units]
清除板件上下面的余胶和碎屑。
Clean excess glue and chips off the panel top and bottom.
自动润滑系统
[Auto Lubricattem]
根据机器运转的时间，定时自动给导轨注油。
Automatically applies grease to the guide rail according to running time.
