可封短边40mm的板材

Realize edge banding with panel width 40mm

快速切换加工不同厚度的板件，减少调机时间，提高效率

Precise & quick adjustment according to workpiece thickness, reducing adjustment time and improving efficiency

有效防止板材端头封边偏位，送料方便、安全稳定，确保封边质量

Stable feeding with small pieces, effectively prevent workpiece out of the guide and ensure a best edging results

可选配PUR装置，快换式上熔胶，拆换便利、快捷，胶锅液位高精仪器监测，自动预熔、抽胶粒

Optional PUR unit,quick-change glue pot and glue level sensor-equipped, EVA glue pre-melts and automatically applies

胶箱储量大，满足长时间供胶，减少人工加胶频率

With the large capacity of glue box, it can satisfy the EVA long-time supply and reduce times in manual application

实现多种形状的修边工艺

Various trimming chamfer can be realized.

高硬度，高耐磨性

High-hardness, high wear-resistance

标配40mm铣刀(可选配65mm)，双铣刀修饰开料后产生的波纹痕迹、毛刺或不垂直等现象，使封边条与板材的贴合更紧密，提升整体美观度

Standard with 40mm milling cutter (optional 65mm),Effectively mill off the defects left after cutting, ensuring a close sticking and improving edging results

预热板件，提升板材与边带的粘合效果

Workpiece preheats to improve adhesive results

强力压合边带，提升板材粘合效果

Strong pressure to improve edging result 

通过精密的直线导轨运动，快速切断板材前后多余边带

Transmits along linear guides, and cut off the front and rear tape on workpiece

配备自动润滑系统，根据运行次数自动注油，确保齐头机构运行顺畅，提高使用寿命

Auto lubrication equipped, automatically applies oils according to running times, ensuring a smooth end-cutting and pro-longing service life 

修整木板上下表面的封边带，消除修边切削时产生的波纹痕迹，提升板材的美观性

Trim off the cutter marks left on panel surface to ensure for a best edging results

在板材上下表面喷涂清洁剂，祛除余胶和碎屑；在待封边的板件上下面喷脱模剂，有效防止封边过程中溢出的热熔胶粘染板面

Spray the clean agent on top&bottom of workpiece to clean dust/chips off the panel surface，The spray agent can effectively isolate hot-melt glue stick on panel surface

清除残余胶痕，使板件更加光滑。

Clean off residual glue to ensure the best edge results.