burkert2080电磁阀中文+英文版产品描述

burkert2080电磁阀英文版产品特点描述：

The valve consists of a pneumatically piston actuator with return spring, a stainless steel body and PTFE bellows. The PTFE bellows are used for the separation of the medium. With the appropriate installation (body to bottom) the valve is self-draining. The materials used and the internal contours are simple to clean (CIP and SIP). The valve is suitable for food technology. The modular structure permits con? guration with different armatures and customized port connectors. The pneumatic actuator is servo assisted by a pilot valve, a valve block or similar.

上海国与自动化设备有限公司专业提供销售burkert2080系列产品

burkert2080电磁阀中文+英文版产品描述：

--高介质抗性
--良好的可清洁性，适合卫生应用领域
--高使用寿命
--简单改装控制功能 无流量时打开/关闭
--紧凑型
--不锈钢执行器

1.  High Medium resistance
2.  Easy to clean for hygienic applications
3.  Long life
4.  Easy conversion of the actuator function, 
5.  normally open/closed
6.  Compact
7.  With stainless steel actuator

burkert2080电磁阀中文+英文版技术参数：

孔口：DN 10，DN6（FL法兰），其他要求
执行器尺寸：直径活塞。 28毫米
适用介质：中性到腐蚀性气体和液体
中等压力范围：真空度可达8条
介质温度：（见PT-图）
端口连接：螺纹接口G 3/8，焊接端，FL法兰连接
先导气连接：螺纹接口G 1/8
位置检测：Reedcontact（两线接近），电缆长度：3米
安装：直立组件自排空（体底部）
阀体材质：不锈钢316TI（1.4571），与FL法兰316L（1.4404）
执行器材质：不锈钢304L（1.4301）
波纹管材质：PTFE*
材质：不锈钢316TI / 316L，PTFE*
背压：紧至8 bar
接地泄漏：5 NML /分，低于座椅空气8巴测
先导空气压力：4.5?10巴
试点流体：中性气体，空气
环境温度：zui高。 +90℃，

表面便可完成：表面便可完成为Ra = 0.8，其他要求
特殊功能：
  - 随着自排操作
- 适用于CIP??和SIP（过程清洁）
- 适用于食品
- 符合美国FDA

Technical data
Ori? ce DN 10, DN6 (? ange), others on request
Actuator size piston diam. 28mm
Medium Neutral to aggressive
gases and liquids
Medium pressure range
Medium temperature
Vacuum up to 8 bar
(see PT-Diagram)
Port connections Threaded port G 3/8, weld end, ? ange connection
Pilot air connections Threaded port G 1/8
Position detection Reedcontact (two wire, closer), cable length: 3m
Installation Upright assembly for self-draining
(body to bottom)
Body material Stainless steel 316Ti (1.4571), with ? ange 316L (1.4404)
Actuator material Stainless steel 304L (1.4301)
Bellows material Advanced PTFE
Wetted materials Stainless steel 316Ti /316L, advanced PTFE
Back pressure Tight to 8 bar
Ground leakage 5 Nml/min, measured with air 8 bar below seat
Pilot air pressure 4.5 to 10 bar
Pilot ? uid Neutral gases, air
Ambient temperature Max. +90 °C
Surface ? nish Surface ? nish Ra=0.8, others on request
Special features - With self-draining operation
- Suitable for CIP and SIP (cleaning in process)
- Suitable for foodstuffs 
- FDA conform

Flow rate
Kv value water [m3/h]
Measured at +20°C, 1 bar Pressure at valve inlet and 
free outlet
Pressure values [bar] Overpressure with respect to atmospheric pressure
Flow direction (liquids) below seat (pressure on port connection 2)

burkert2080电磁阀中文+英文版产品描述：（订货表）

Ordering chart for valves (other versions on request)
All valves with pilot air ports G 1/8 and actuator body in stainless steel