2022年11月25日 17:51:51 来源：青岛恒丰友电气工程有限公司 >> 进入该公司展台 阅读量：14
德国标准化学会。德文名称：Deutsches Institut für Normung e.V.德文缩写： 。德国的具有广泛代表性的公益性标准化民间机构。成立于1917年。总部设在首都柏林。1917年5月18日，德国工程师协会（VDI）在柏林制造局召开会议, 决定成立通用机械制造标准委员会,其任务是制定VDI规则。同年7月，标准委员会建议将各工业协会制定的标准与德国工程师协会标准合并，通称为德国工业标准（DIN）。1917年12月22日通用机械制造标准委员会改组为德国工业标准委员会(NDI)。该委员会览于其标准化活动早已超越了工业领域， 遂于1926年11月6日改名为德国标准委员会(DNA)。第二次世界大战期间（1936~1945）,该委员会停止活动。1946年10月经四国管制委员会同意,德国标准委员会曾作为民主德国与联邦德国双方代表组成的机构在全德境内开展工作。1954年民主德国标准化局成立，德国标准委员会就成了联邦德国的标准化机构，但在民主德国境内仍设有办事机构，直到1961年才撤销。 1968年民主德国宣布退出 DNA。自此以后 ,DNA的活动于联邦德国和西柏林。 1975年5月 21日德国标准委员会改为现称。同年 6月 5日 DIN与联邦政府签订一项协议：联邦政府承认 DIN是联邦德国和西柏林的标准化主管机构，并代表德国参加非政府性的国际和区域标准化机构。 1990年 4月 3日，德国实现统一，民主德国标准化、计量与商品检验局(ASMW)停止活动。
德国国中压电网电压为：20kv。低压电压为：230V/50Hz 。恒丰友电气符合DIN、KEMA CB标准，已为多家德国变压器公司提供油浸式变压器铁芯及变压器定制服务。
| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 4000-70-1992 | 小型变压器和扼流圈用铁芯叠片、铁芯和线圈架的产品特性图表 | Tabular layouts of article characteristics for core laminations, cores and coil formers for small transformers and chokes |
| DIN 41300-1-1979 | 小型变压器.M、EI、SM和SE形铁芯特性数据(有微小材料浪费的EI型) | Small transformers - Characteristic data, M, EI, SM and SE cores (EI-type with small waste of material) |
| DIN 41307-1-1973 | 小型变压器和扼流圈用附件.EJ型固定搭接片 | Accessory parts for small transformers and chokes; fixing straps for type EI |
| DIN 41307-2-1973 | 小型变压器和扼流圈用附件.M、EI和UI型安装角度 | Accessory parts for small transformers and chokes; fixing angles for types M, EI and UI |
| DIN 41307-3-1981 | 小型变压器和扼流圈的附件.EI.UI和3UI型铁芯的连接片 | Accessory parts for small transformers and chokes; attachment straps for cores typ E, U and 3 U |
| DIN 41307-4-1981 | 小型变压器附件和电抗器.UI和3UI型铁芯固定托架 | Accessory parts for small transformers and chockes; fixing brackets for cores type UI and 3UI |
| DIN 41307-5-1981 | 小型变压器和扼流圈用附件.E、ED、EE、EF及EK型铁芯托架.印制电路、水平磁轴 | Accessory parts for small transformers and chokes; brackets for cores type E, ED, EE, EF and EK; printed circuits, magnetic axis horizontal |
| DIN 42402-1976 | 变压器和电抗器的端子标记 | Terminal markings for power transformers and reactors |
| DIN 42404-1985 | 小型变压器端子标记.安全绝缘变压器.可调变压器和小型扼流器 | Terminal markings for small transformers, safety isolating transformers, variable transformers and small chokes |
| DIN 42500-1-1993 | 50Hz、50至2500kVA三相油浸式配电变压器.一般要求和对Um小于24kV变压器的要求 | Three-phase oil-immersed distribution transformers 50 Hz, 50 up to 2500 kVA; general requirements and requirements for transformers U<(Index)m> up to 24 kV; German version HD 428.1 S1:1992 |
| DIN 42500-1/A1-1996 | 50Hz、50至2500kVA三相油浸式配电变压器.第1部分:一般要求和对Um小于24kV变压器的要求.修改件1 | Three-phase oil-immersed distribution transformers 50 Hz, 50 up to 2500 kVA - Part 1: General requirements and requirements for transformers U<(Index)m> up to 24 kV; Amendment A1:1995-03; German version HD 428.1 S1/A1:1995 |
| DIN 42500-21-1995 | 电压36Kv以下50Hz.50至2500kVA三相交流油浸式配电变压器.第2部分:高压和/或低压端上带电缆接线盒的配电 | Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high voltage and/or low voltage side; section 1: General requirements; German version HD 428.2.1 S1:1994 |
| DIN 42500-3-1995 | 操作设备用电压不超过 36 kV 的 50Hz、50 kVA - 2500 kVA 的三相交流油浸式配电变压器.第3部分:操作设 | Three phase oil-immersed distribution transformers 50 Hz, from 50-up to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 3: Supplementary requirements for transformers with highest voltage for equipment equal to 36 kV; German version HD 428.3 S1:1994 |
| DIN 42500-4-1995 | 操作设备用电压不超过 36 kV 的 50Hz、50 kVA - 2500 kVA 的三相交流油浸式配电变压器.第4部分:非正弦 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA for equipment not exceeding 36 kV - Part 4: Determination of power rating of a transformer loaded with non-sinusoidal currents; German version HD 428.4 S1:1994 |
| DIN 42500-6-2003 | 电压不超过36Kv的设备用50Hz、50至2500kVA的三相油浸式配电变压器.第6部分:有关增压式波形槽的要求和试 | Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not excceeding 36 kV - Part 6: Requirements and tests concerning pressurised corrugated tanks; German version HD 428.6 S1:2002 |
| DIN 42504-1-1983 | 变压器.装有断路分接头切换或带载分接头换接的50Hz、2000-10000KVA和Um小于123KV的三相油浸变压器.性能参数 | Transformers; three-phase oil immersed type power transformers with off-circuit tapchanger or with on-load tap-changer 2000 to 10000 kVA for 50 Hz and U<(Index)m> up to 123 kV; characteristics |
| DIN 42504-2-1971 | 分别带断路分接开关或载荷分接开关的功率变压器.2000～10000KVA绝缘等级110N以下的主要尺寸和附件 | Powertransformers with off circuit tap-changer resp. on load tap changer; main dimensions and accessories, 2000 to 10000 kVA and up to insulation class 110 N |
| DIN 42508-1-1983 | 变压器.装有断路分接头切换或带载分接头换接的50HZ、12500-80000KVA和Um小于123KV的三相油浸变压器.性能参 | Transformers; three-phase oil immersed type power transformers with off-circuit tap-changer or with on-load tap-changer 12500 to 80000 kVA for 50 Hz and U<(Index)m> up to 123 kV; characteristics |
| DIN 42508-3-1993 | 变压器.50Hz、123kV以下用带断路分接开关或带12500至80000kVA带负荷分接开关的三相油浸变压器.要求和附件 | Transformers; three-phase oil immersed transformers with off-circuit tap-changer or with on-load tap-changer 12500 to 80000 kVA for 50 Hz and U<(Index)m> up to 123 kV; requirements and accessories |
| DIN 42508-4-1993 | 变压器.装有断路分接头切换或带载分接接头转换的50Hz、12500至80000kVA和Um小于123kV的三相油浸变压器.2500 | Transformers; three-phase oil immersed transformers with off-circuit tap-changer or with on-load tap-changer, 12500 to 80000 kVA for 50 Hz and U<(Index)m> 123 kV; main dimensions and weights for 25000 to 40000 kVA |
| DIN 42513-1989 | 变压器.变压器和电抗器部件的标记 | Transformers; marking of components for transformers and reactors |
| DIN 42523-1/A1-1996 | 50Hz、100至2500kVA.第1部分:一般要求和对Um小于24kV变压器的要求.修改件1 | Dry-type transformers 50 Hz, 100 up to 2500 kVA - Part 1: General requirements and requirements for transformers U<(Index)m> up to 24 kV; Amendment 1:1995; German version HD 538.1 S1/A1:1995 |
| DIN 42523-2-1996 | 50Hz100至2500kVA.第2部分:36kV设备用电压变压器补充规定 | Dry-type transformers 50 Hz, from 100 to 2500 kVA - Part 2: Supplementary requirements for transformers with highest voltage for equipment at 36 kV; German version HD 538.2 S1:1995 |
| DIN 42523-3-1997 | 电压不超过36KV设备用电阻为50Hz、电流100至2500kVA的三相，干式配电变压器.第3部分:负载无正弦电流的 | Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal current; German version HD 538.3 S1:1997 |
| DIN 42534-1954 | 变压器；户内和户外套管.串联电压45KV-1000A | Transformers; bushings for indoor and outdoor, series voltage 45 kV to 1000 A |
| DIN 42538-1969 | 变压器；套管的安装装置 | Transformers; Fixing Arrangement for Bushings |
| DIN 42539-1-1968 | 变压器；户内和户外型进线套管.250A至3150A用绝缘等级3N.组件 | Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Assembly |
| DIN 42539-2-1968 | 变压器；户内和户外型进线套管.250A至3150A用绝缘等级3N.单个零件 | Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Single Parts |
| DIN 42544-1991 | 变压器.直通旋塞.三通旋塞.要求 | Transformers; straight-way cocks, three-way cocks; requirements |
| DIN 42545-1987 | 变压器.集油槽DN25.要求和试验 | Transformers; oil trap DN 25; requirements and test |
| DIN 42547-1994 | 变压器和电抗器.铭牌和设计 | Transformers and reactors; rating plates; design |
| DIN 42552-1992 | 变压器.油位指示器 | Transformers; oil-level-indicator |
| DIN 42553-1986 | 变压器.防雪放气装置.注油塞 | Transformers; de-aerator with snow protection; filling nozzle |
| DIN 42555-1975 | 变压器油位指示器 | Oil-level-indicator for transformers |
| DIN 42558-1992 | 变压器.通气孔和排油孔的锁紧件 | Transformers; locking pieces for air vent and drain for oil |
| DIN 42561-2-1992 | 变压器.辊轮.承载能力10吨 | Transformers; rollers; load carrying capacity 10 t |
| DIN 42561-3-1992 | 变压器.滚子.中心距和轨距 | Transformers; rollers; center-line spacings and rail gauges |
| DIN 42562-1-1987 | 变压器.带填料1.2至4.8公斤的硅胶吸湿器变压器.组件 | Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; assembly |
| DIN 42562-2-1987 | 变压器.带填料1.2至4.8公斤的硅胶吸湿器变压器.零件 | Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; components |
| DIN 42565-1951 | 电力变压器.户外装置用叶片直径350mm风扇. | Power Transformers; Fans, Blade Diameter 350 mm, for Open-air Installation |
| DIN 42567-1967 | 填充量1公斤的变压器用吸湿器. | Dehydrating breathers for transformers, filling capacity 1 kg |
| DIN 42568-1982 | 变压器.取样和排放用15和32公称内径的放出阀 | Transformers; outlet valve DN 15 and DN 32 for sampling and discharge |
| DIN 42600-1-1973 | 50Hz仪表用变压器.绝缘等级0.5-45N（系统电压为0.6-52kV）.通用规范 | Instrument transformers for 50 Hz, insulation class 0,5 to 45 N (highest system voltages 0,6 to 52 kV); general directions |
| DIN 42600-2-1983 | 50Hz、U<指数m>为0.6至52KV的仪表用变压器.U<指数m>等于0.8KV的电流互感器.主要尺寸 | Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers U<(Index)m>=0,8 kV; main dimensions |
| DIN 42600-3-1965 | 绝缘等级为 0.5、1 N - 45 N 的 50 c/s 的仪表变压器.第3部分:最重要尺寸的绝缘等级为 10 N - 30 N 变压器 | Instrument transformers for 50 c/s, insulation class 0,5, 1 N to 45 N; voltage transformers, insulation class 10 N to 30 N, most important dimensions |
| DIN 42600-4-1977 | 50Hz、HSV0.6-52KV的仪表用变压器.小型结构Um12KV电流互感器（支承式绝缘子）主要尺寸，户内型 | Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; currenttransformers (support-typ-insulator), HSV 12 kV, small design, main dimensions, indoor type |
| DIN 42600-5-1977 | 50Hz、0.6-52KV的仪表用变压器.电流互感器（支承式绝缘子）Um12-36KV.大型.主要尺寸.户内型 | Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; current transformers (support-type-insulator) HSV 12 to 36 kV, large design, main dimensions, indoor type |
| DIN 42600-7-1986 | 50Hz、Um小于52KV的仪表用变压器.电压变压器Um12KV.狭长型.主要尺寸.户内型 | Instrument transformers for 50 Hz, U<(Index)m> to 52 kV; voltage transformers U<(Index)m> 12 kV; narrow design, main dimensions, indoor type |
| DIN 42600-8-1983 | 50Hz、Um0.6-52KV的仪表用变压器.电流互感器（支承式绝缘子）Um12和24KV.狭长型.主要尺寸.户内型 | Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers (support-type-insulators) U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type |
| DIN 42600-9-1985 | 50Hz、Um0.6-52KV的仪表用变压器.电压变压器Um12和24KV.狭长型.主要尺寸.户内型 | Instruments transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; voltage transformers U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type |
| DIN 42603-1985 | 仪器变压器.额定值铭牌 | Instrument transformers; rating plates |
| DIN 43101-5-1976 | 电力牵引用机车车辆.第5部分:变压器术语 | Rolling stock for electric traction; terms for transformers |
| DIN 43675-1-1975 | 第1部分:变压器用额定值在 400 和 3150 A 之间的连接螺栓和电压小于 60 kV 穿墙套管的矩形断面连接器 | Rectangular-section connectors for terminal studs rated between 400 and 3150 A for power transformer- and wallbushings below 60 kV |
| DIN 43675-2-1984 | 柱螺栓用连接件.户外变压器套管的扁连接件.Um24和36KV.5和8kA | Connectors for terminal studs; flat connectors for outdoor transformer bushings; U<(Index)m> 24 and 36 kV, 5 and 8 kA |
| DIN 43675-5-1979 | 第5部分:变压器套管的额定为 1000 A 的终端接线柱用八角连接器 | Octagon connectors for terminal studs, rated over 10000 A, for transformer-bushings |
| DIN 43857-3-1974 | 安装在额定电流可达 60 A 的无仪表变压器模压绝缘外壳的瓦时计.第3部分:单相计终端电度表盖的主要尺寸 | Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters |
| DIN 43857-4-1974 | 安装在额定电流可达 60 A 的无仪表变压器模压绝缘外壳的瓦时计.第4部分:多相计终端电度表盖的主要尺寸 | Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters |
| DIN 43857-5-1998 | 额定电流在60A以下无仪表变压器的模压壳体的电度表.第5部分.端子盖的主要尺寸 | Watthour meters in moulded case without instrument transformers up to 60 A rated maximum current - Part 5: Principal dimensions for terminal cover |
| DIN 44766-2-1981 | 电阻焊变压器；吊挂式.尺寸、特性 | Resistance welding transformers; suspension type, dimensions, characteristics |
| DIN 44766-3-1981 | 电阻焊变压器；法兰连接的变压器；尺寸.特性 | Resistance welding transformers; transformers with flanged joints; dimensions, characteristics |
| DIN 44767-1976 | 200A.550V电阻焊接变压器初级线圈连接装置耦合器 | Appliance Coupling for the Primary Connection of Resistance Welding Transformers, 200 A 550 V |
| DIN EN 125200-1993 | 分规范.线性变压器用磁氧体铁芯 | Sectional specification: magnetic oxide cores for linear transformers; german version EN 125200:1991 |
| DIN EN 125400-1993 | 分规范.感应线圈和调谐变压器中的磁氧体铁芯用调节器 | Sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers; german version EN 125400:1991 |
| DIN EN 125401-1993 | 空白详细规范.感应线圈和调谐变压器中的磁氧体铁芯用调节器 | Blank detail specification: adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers; german version EN 125401:1991 |
| DIN EN 2591-704-2002 | 航空航天系列.光电连接件.试验方法.第704部分:电气元件.耦合器变压器转换比测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler; German and English version EN 2591-704:2001 |
| DIN EN 50152-3-2-2001 | 铁路设施.固定装置.交流电开关的特殊要求.第3-2部分:交流牵引系统专用测量、控制和保护装置.单相电流变压器 | Railway applications - Fixed installations; Particular requirements for AC switchgear - Part 3-2: Measurement, control and protection devices for specific use in AC traction systems; Single-phase current transformers; German version EN 50152-3-2:2001 |
| DIN EN 50152-3-3-2001 | 铁路设施.固定装置.交流电开关的特殊要求.第3-3部分:交流牵引系统专用测量、控制和保护装置.单相感应电压变 | Railway applications - Fixed installations; Particular requirements for AC switchgear - Part 3-3: Measurement, control and protection devices for specific use in AC traction systems; Single-phase-inductive voltage transformers; German version EN 50152-3-3:2001 |
| DIN EN 50180 Bb.1-2005 | 充液式变压器用大于1kV小于等于36kV的250A到315KA的套管 | Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers - Constructional details of components |
| DIN EN 50180 Bb.2-2001 | 充油变压器用1kV-36kV及250A-3.15kA衬套.结构紧固件 | Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers - Constructional details of fastening |
| DIN EN 50180-1998 | 已充装液体的变压器用1kV以上至36kV和250A至3,15kA的套管 | Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers; German version EN 50180:1997 + Corrigendum 1998 |
| DIN EN 50181-1998 | 装液变压器除外的其它设备用电压1kV以上至36kV,电流从250A至1,25kA的插接式套管 | Plug-in type bushings above 1 kV up to 36 kV and from 250 A to 1,25 kA for equipment other than filled transformers; German version EN 50181:1997 |
| DIN EN 50216-1-2002 | 电力变压器和电抗器配件.第1部分:总则; 德文版本 EN 50216-1:2002 | Power transformer and reactor fittings - Part 1: General; German version EN 50216-1:2002 |
| DIN EN 50216-2-2002 | 电力变压器和电抗器配件.第2部分:带油枕的液体浸没式变压器和电抗器用气动和油动继电器; 德文版本 EN 50216 | Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator; German version EN 50216-2:2002 |
| DIN EN 50216-2/A1-2003 | 电力变压器和电抗器配件.第2部分:带储油箱的液浸变压器和电抗器用气体和油驱动的继电器.修改件A1 | Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator; Amendment A1; German version EN 50216-2:2002/A1:2002 |
| DIN EN 50216-3-2002 | 电力变压器和电抗器配件.第3部分:无气垫的密封液体浸没式变压器和电抗器用保护继电器; 德文版本 EN 50216-3 | Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion; German version EN 50216-3:2002 |
| DIN EN 50216-3/A1-2003 | 电力变压器和电抗器配件.第3部分:密封液浸式变压器和无气垫电抗器用保护继电器.修改件A1 | Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion; Amendment A1; German version EN 50216-3:2002/A1:2002 |
| DIN EN 50216-4-2002 | 电力变压器和电抗器配件.第4部分:基本附件(接地终端、排放和填充设备、温度计套和轮组件); 德文版本 EN 502 | Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly); German version EN 50216-4:2002 |
| DIN EN 50216-5-2005 | 电力变压器和电抗器配件.第5部分:液位计、压力装置和流量指示器、压力释放装置和脱水通气装置 | Power transformer and reactor fittings - Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers; German version EN 50216-5:2002 + A1:2002 + A2:2005 |
| DIN EN 50216-6-2002 | 电力变压器和电抗器配件.第6部分:冷却设备.油浸变压器的可移动式散热器; 德文版本 EN 50216-6:2002 | Power transformer and reactor fittings - Part 6: Cooling equipment; Removable radiators for oil-immersed transformers; German version EN 50216-6:2002 |
| DIN EN 50216-7-2002 | 电力变压器和电抗器配件.第7部分:变压器油用电力泵; 德文版本 EN 50216-7:2002 | Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil; German version EN 50216-7:2002 |
| DIN EN 50243-2003 | 充液体变压器用 24 kV、36 kV、5 kA 和 8 kA 的户外套管; 德文版本 EN 50243:2002 | Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers; German version EN 50243:2002 |
| DIN EN 50299 Berichtigung 1-2005 | 设备电压为72.5kV到550kV的变压器和反应器用油浸式电缆连接组件 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV; German version EN 50299:2002, Corrigenda to DIN EN 50299:2003-10 |
| DIN EN 50299-2003 | U<指数m>设备的电压从72.5kV-550kV的变压器和电抗器用油浸式电缆连接组件 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV; German version EN 50299:2002 |
| DIN EN 50329-2003 | 铁路设施.固定式装置.牵引式变压器 | Railway applications - Fixed installations - Traction transformers; German version EN 50329:2003 |
| DIN EN 50336-2002 | 不超过36kV的变压器和电抗器电缆箱用套管; 德文版本 EN 50336:2002 | Bushings for transformer and reactor cable boxes not exceeding 36 kV; German version EN 50336:2002 |
| DIN EN 50386-2004 | 液浸式变压器用1kV及以下且250 A至5 kA的套管 | Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers; German version EN 50386:2002 |
| DIN EN 50387-2004 | 液浸式变压器用1kV及以下且1.25 KA至5 kA的母线套管 | Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers; German version EN 50387:2002 |
| DIN EN 60044-5 Berichtigung 1-2005 | 仪表用变压器.第5部分:电容电压互感器.DIN EN 60044-5 (VDE 0414-44-5)-2005的技术勘误 | Instrument transformers - Part 5: Capacitor voltage transformers ( 60044-5:2004); German version EN 60044-5:2004, Corrigenda to DIN EN 60044-5 (VDE 0414-44-5):2005-03 |
| DIN EN 60044-8-2003 | 仪表变压器.第8部分:电子流变压器 | Instrument transformers - Part 8: Electronic current transformers ( 60044-8:2002); German version EN 60044-8:2002 |
| DIN EN 60076-1-2003 | 电力变压器.第1部分:总则 (-1:1993、修订版 + A1:1999); 德文版本 EN 60076-1:1997 + A1:2000 + A | Power transformers - Part 1: General (-1:1993, modified + A1:1999); German version EN 60076-1:1997 + A1:2000 + A12:2002 |
| DIN EN 60076-10-2002 | 电力变压器.第10部分:声级测定 | Power transformers - Part 10: Determination of sound levels (IEC 60076-10:2001); German version EN 60076-10:2001 |
| DIN EN 60076-11-2005 | 电力变压器.第11部分:干式变压器 | Power transformers - Part 11: Dry-type transformers (IEC 60076-11:2004); German version EN 60076-11:2004 |
| DIN EN 60076-2-1997 | 电力变压器.第2部分:升温 | Power transformers - Part 2: Temperature rise (IEC 60076-2:1993, modified); German version EN 60076-2:1997 |
| DIN EN 60076-3-2001 | 电力变压器.第3部分:绝缘级别,露天介电试验和外部间隙 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air (IEC 60076-3:2000 + Corrigendum 2000); German version EN 60076-3:2001 |
| DIN EN 60076-4-2003 | 电力变压器.第4部分:闪电脉冲和开关脉冲试验指南.电力变压器和电抗器 | Power transformers - Part 4: Guide to lightning impulse and switching impulse testing; Power transformers and reactors (IEC 60076-4:2002); German version EN 60076-4:2002 |
| DIN EN 60076-5-2001 | 电力变压器.第5部分:抗短路能力 | Power transformers - Part 5: Ability to withstａnd short circuit (IEC 60076-5:2000); German version EN 60076-5:2000 |
| DIN EN 60296-2005 | 电工用液体.变压器和开关设备用未使用过的矿物绝缘油 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear (IEC 60296:2003); German version EN 60296:2004 + Corrigendum:2004 |
| DIN EN 60310-2005 | 铁路设施.铁路车辆用牵引变压器和电感器 | Railway applications - Traction transformers and inductors on board rolling stock (IEC 60310:2004); German version EN 60310:2004 |
| DIN EN 60401-3-2004 | 软磁材料制芯的术语和命名.第3部分:写入变压器和电感器磁芯制造厂产品目录中的数据格式指南 | Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores (IEC 60401-3:2003); German version EN 60401-3:2003 |
| DIN EN 60598-2-6-1995 | 灯具.第2部分:特殊要求.第6节:白炽灯用带插入变压器的灯具 | Luminaires - Part 2: Particular requirements; section 6: Luminaires with built-in transformers for filament lamps (IEC 60598-2-6:1994); German version EN 60598-2-6:1994 |
| DIN EN 60598-2-6/A1-1997 | 灯具.第2部分:特殊要求.第6节:白炽灯用带插入变压器或变流器的灯具 | Luminaires - Part 2: Particular requirements; section 6: Luminaires with built-in transformers or converters for filament lamps (IEC 60598-2-6:1994/A1:1996); German version EN 60598-2-6/A1:1997 |
| DIN EN 60740-1-2006 | 变压器和电感器用叠层铁芯.第1部分:机械和电气特性(IEC 60740-1-2005).德文版本 EN 60740-1-2005 | Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics (IEC 60740-1:2005); German version EN 60740-1:2005 |
| DIN EN 60852-4-1997 | 电信和电子设备用变压器和电感器的外形尺寸.第4部分:使用YEI-2型叠片的变压器和电感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations (IEC 60852-4:1996); German version EN 60852-4:1996 |
| DIN EN 61007-1998 | 电子和电信设备用变压器和感应器.测量方法和试验程序 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (IEC 61007:1994, modified); German version EN 61007:1997 |
| DIN EN 61021-1-1997 | 电信和电气设备变压器和电感器叠片铁心包.第1部分:尺寸 | Laminated core packages for transformers and inductors used in telecommunication and electronic equipment - Part 1: Dimensions (IEC 61021-1:1990); German version EN 61021-1:1997 |
| DIN EN 61021-2-1997 | 电信和电气设备用的变压器和电感器的叠片铁心包.第2部分:用YEE 2 叠片铁芯的电器性能 | Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations (IEC 61021-2:1995); German version EN 61021-2:1997 |
| DIN EN 61050-1994 | 空载输出电压超过1000伏的管形放电灯变压器(通称霓虹灯变压器).一般要求和安全要求 | Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements (IEC 61050:1991 + Corrigendum March:1992, modified); German version EN 61050:1994 |
| DIN EN 61203-1995 | 电工用合成有机酯.设备变压器酯维护指南 | Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment (IEC 61203:1992); German version EN 61203:1994 |
| DIN EN 61248-1-1998 | 电子和电信设备的变压器和电感器.第1部份:总规范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996); German version EN 61248-1:1997 |
| DIN EN 61248-2-1998 | 电子和电信设备的变压器和电感器.第2部份:以性能批准程序为基础的信号变压器分规范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996); German version EN 61248-2:1997 |
| DIN EN 61248-3-1998 | 电子和电信设备用变压器和电感器.第3部份:以性能批准程序为基础的电力变压器分规范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996); German version EN 61248-3:1997 |
| DIN EN 61248-4-1998 | 电子和电信设备用变压器和电感器.第4部分:以性能批准程序为基础的开关模式供电用电力变压器分规范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure (IEC 61248-4:1996); German version EN 61248-4:1997 |
| DIN EN 61248-5-1998 | 电子和电信设备用变压器和电感器.第5部分:以性能批准程序为基础的脉冲变压器分规范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996); German version EN 61248-5:1997 |
| DIN EN 61248-6-1998 | 电子和电信设备用变压器和电感器.第6部分:以性能批准程序为基础的电感器分规范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure (IEC 61248-6:1996); German version EN 61248-6:1997 |
| DIN EN 61248-7-1998 | 电子和电信设备变压器和电感器.第7部分:基于合格认证的HF-电感器和ZF-变压器分规范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1996); German version EN 61248-7:1997 |
| DIN EN 61378-1-1999 | 变频变压器.第1部分:工业用变压器 | Convertor transformers - Part 1: Transformers for industrial applications (IEC 61378-1:1997); German version EN 61378-1:1998 + Corrigendum 1998 |
| DIN EN 61378-2-2001 | 转换器变压器.第2部分:高压直流转换器(HVDC)用变压器 (IEC 61378-2:2001); 德文版本 EN 61378-2:2001 | Convertor transformers - Part 2: Transformers for HVDC applications (IEC 61378-2:2001); German version EN 61378-2:2001 |
| DIN EN 61558-2-1-1998 | 电力变压器,供电设备及类似设备的安全.第2-1部分:一般用途网络变压器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2-1: Particular requirements for separating transformers for general use (IEC 61558-2-1:1997); German version EN 61558-2-1:1997 |
| DIN EN 61558-2-12-2002 | 电力变压器、供电设备及类似装置的安全性.第2-12部分:恒压变压器的特殊要求 (IEC 61558-2-12:2001); 德文版 | Safety of power transformers, power supply units and similar devices - Part 2-12: Particular requirements for constant voltage transformers (IEC 61558-2-12:2001); German version EN 61558-2-12:2001 |
| DIN EN 61558-2-13-2000 | 电力变压器、电源装置及类似设备的安全.第2-13部分:通用自耦变压器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-13: Particular requirements for auto-transformers for general use (IEC 61558-2-13:1999); German version EN 61558-2-13:2000 |
| DIN EN 61558-2-15-2001 | 电力变压器、供电装置和类似件设备的安全性.第2-15部分:医疗场地供电用绝缘变压器的特殊要求 (IEC 61558-2- | Safety of power transformers, power supply units and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, modified); German version EN 61558-2-15:2001 |
| DIN EN 61558-2-17-1998 | 电力变压器、供电设备及类似设备的安全性.第2-17部分:开关式供电安全变压器特殊要求 | Safety of power transformers, power supply units and similar - Part 2-17: Particular requirements for safety isolating transformers for switch mode power supplies (IEC 61558-2-17:1997); German version EN 61558-2-17:1997 |
| DIN EN 61558-2-19-2001 | 电力变压器、供电设备及类似设备的安全性.第2-19部分:扰动衰减变压器特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-19: Particular requirements for perturbation attenuation transformers (IEC 61558-2-19:2000); German version EN 61558-2-19:2001 |
| DIN EN 61558-2-2-1998 | 电力变压器、供电设备及类似设备的安全性.第2-2部分:控制变压器特殊要求 | Safety of power transformers, power supply units and similar - Part 2-2: Particular requirements for control transformers (IEC 61558-2-2:1997); German version EN 61558-2-2:1998 + Corrigendum 1998-02 |
| DIN EN 61558-2-20-2001 | 电力变压器、供电装置和类似装置的安全性.第2-20部分:小型电抗器特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-20: Particular requirements for small reactors (IEC 61558-2-20:2000); German version EN 61558-2-20:2000 |
| DIN EN 61558-2-23-2001 | 电力变压器、供电装置和类似装置的安全性.第2-23部分:施工工地变压器特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-23: Particular requirements for transformers for construction sites (IEC 61558-2-23:2000); German version EN 61558-2-23:2000 |
| DIN EN 61558-2-3-2000 | 电力变压器、电源装置及类似设备的安全.第2-3部分:燃气及燃油燃烧器用点火变压器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-3: Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999); German version EN 61558-2-3:2000 |
| DIN EN 61558-2-4-1998 | 电力变压器安全性.供电设备及类似设备.第2-4部分:普通特殊要求 | Safety of power transformers, power supply units and similar - Part 2-4: Particular requirements for isolating transformers for general use (IEC 61558-2-4:1997); German version EN 61558-2-4:1997 |
| DIN EN 61558-2-5-1998 | 电力变压器安全性.供电设备及类似设备.第2-5部分:电动剃须刀插座变压器和电动剃须刀插座组件特殊要求 | Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for control transformers (IEC 61558-2-5:1997); German version EN 61558-2-5:1998 |
| DIN EN 61558-2-5/A11-2005 | 电力变压器、供电设备及类似设备的安全.第2-5部分:剃须刀变压器和剃须刀电源装置的特殊要求 | Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for shaver transformers and shaver supply units; German version EN 61558-2-5:1998/A11:2004 |
| DIN EN 61558-2-6-1998 | 电力变压器安全性.供电设备及类似设备.第2-6部分:普通安全变压器特殊要求 | Safety of power transformers, power supply units and similar - Part 2-6: Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997); German version EN 61558-2-6:1997 |
| DIN EN 61558-2-7-1998 | 电力变压器安全性.供电设备及类似设备.第2部分:玩具用变压器特殊要求 | Safety of power transformers, power supply units and similar - Part 2-7: Particular requirements for transformers for toys (IEC 61558-2-7:1997, modified); German version EN 61558-2-7:1997 |
| DIN EN 61558-2-7/A11-2003 | 电力变压器、供电设备及类似设备安全性.第2-7部分:玩具变压器特殊要求.修改件A11 | Safety of power transformers, power supply units and similar - Part 2-7: Particular requirements for transformers for toys; Amendment A11; German version EN 61558-2-7/A11:2002 |
| DIN EN 61558-2-8-1999 | 电力变压器安全性.供电设备及类似设备.第2-8部分:铃和钟变压器的特殊要求 | Safety of small power transformers, power supply units and similar - Part 2-8: Particular requirements for bell and chime transformers (IEC 61558-2-8:1998); German version EN 61558-2-8:1998 |
| DIN EN 61558-2-9-2003 | 电力变压器、供电设备及类似设备安全性.第2-9部分:Ⅲ类手提钨丝灯变压器特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002); German version EN 61558-2-9:2003 |
| DIN EN 61596-1998 | 电感器和变压器用的磁氧化EP芯和相关部件.尺寸 | Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions (IEC 61596:1995); German version EN 61596:1997 |
| DIN EN 61797-1-1997 | 电信和电子设备变压器和感应器.线圈架主要尺寸.第1部分:叠层铁芯线圈架 | Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores (IEC 61797-1:1996); German version EN 61797-1:1996 |
| DIN EN 61823-2003 | 机场照明和航路信用电气设备.AGL系列变压器 | Electrical installations for lighting and beaconing of aerodromes - AGL series transformers (IEC 61823:2002, modified); German version EN 61823:2003 |
| DIN EN 62041-2004 | 电力变压器、电源器件、电抗器和类似产品.EMC要求 | Power transformers, power supply units, reactors and similar products - EMC requirements (IEC 62041:2003); German version EN 62041:2003 |
| DIN EN 5826-2003 | 电阻焊设备.变压器.适用于所有变压器的通用规范 | Resistance welding equipment - Transformers - General specifications applicable to all transformers ( 5826:1999); German version EN ISO 5826:2003 |
| DIN EN ISO 7284-1996 | 电阻焊设备.汽车工业用多点点焊的两个分立副线圈变压器专用规范 | Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the auto industry (ISO 7284:1993); German version EN ISO 7284:1996 |
| DIN IEC 60740-2-1995 | 电信和电子设备变压器和电感器铁芯片.第2部分:软磁金属材料制铁芯片最小漏磁性规范 | Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials (IEC 60740-2:1993) |
| DIN IEC 60852-1-1990 | 电信和电子设备变压器和电感器的外形尺寸.第1部分:使用YEI-1型叠片的变压器和电感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment; part 1: transformers and inductors using YEI 1 laminations; identical with IEC 60852-1:1986 |
| DIN IEC 60852-2-1994 | 电信和电子设备用变压器和电感器的外形尺寸.第2部分:印制电路板安装用带YEx-2芯的变压器和电感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment; part 2: transformers and inductors using YEx 2 laminations for printed wiring board mounting; identical with IEC 60852-2:1992 |
| DIN IEC 60852-5-1995 | 电信和电子设备用变压器和电感器的外形尺寸.第5部分:使用C铁芯的Q系列变压器和电感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores (IEC 60852-2:1994) |
| DIN IEC 60944-1995 | 硅酮变压器油维护指南 | Guide for the maintenance of silicone transformer liquids; identical with IEC 60944:1988 |
| DIN IEC 61186-1-1993 | 电信和电子设备用变压器和电感器.铁芯和组件命名.第1部分:叠片铁芯 | Transformers and inductors for use in telecommunication and electronic equipment; designations for cores and assemblies; part 1: laminated cores; identical with IEC 61186-1:1992 |
| DIN ISO 10656-2006 | 电阻焊接.焊枪用集成变压器(ISO 10656-1996, 包括技术勘误表 1-2000) | Electric resistance welding - Integrated transformers for welding guns (ISO 10656:1996, including Technical Corrigendum 1:2000) |
| DIN ISO 12166-2006 | 电阻焊设备.汽车工业中多点焊接用带一个副线圈的变压器的特殊规范 (ISO 12166-1997) | Resistance welding equipment - Particular specifications applicable to transformers with one secondary winding for multispot welding, as used in the auto industry (ISO 12166:1997) |
| DIN VDE 0119-206-3-2004 | 铁路车辆状况.电力和牵引系统、列车电气设备.第206-3部分:主变压器 | State of railway vehicles - Electric and traction systems, train electrical equipment - Part 206-3: Main transformers |
| DIN VDE 0370-2-1978 | 绝缘油.变压器和开关装置用的绝缘油 | Insulating oils; Insulating oils in service in transformers and switchgear |
| DIN VDE 0414-6-1995 | 仪表用变压器.电压电平Um52Kv以下用三相电压变压器 | Instrument transformers - Three-phase voltage transformers for voltage levels having U<(Index)m> up to 52 kV; German version HD 587 S1:1993 |
| DIN VDE 0532-14-2004 | 变压器与电抗器.第14部分:套管的外部保护火花间隙 | Transformers and reactors - Part 14: External protective spark gaps on bushings |
| DIN VDE 0532-21-1982 | 变压器和电抗器.起动变压器和起动电抗器.[VDE 规范] | Transformers and reactors; starting transformers and starting reactors [VDE Specification] |
| DIN VDE | 设备电压不超过36 kV的50 HZ,50至2500 kVA三相交流油浸配电变压器.第2部分:高压侧和/或低压侧带电缆接 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side; section 2: Cable boxes type 1 for use on distribution transformers meeting the requirements of HD 428.2.1 S1; German version HD 428.2.2 S1:1997 |
| DIN VDE | 不超过36kV电压的设备用的带高压的50Hz,50至2500kVA的三相油浸配电变压器.第2部分:高压侧和/或低压侧上带 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side; Section 3: Cable boxes type 2 for use on distribution transformers meeting the requirements of HD 428.2.1; German version HD 428.2.3 S1:1998 |
| DIN VDE 0532-31-1993 | 变压器和电抗器.带负荷分接开关的选择和应用指南 | Transformers and reactors; guide to selection and application of on-load tap-changers |
| DIN VDE 0534-1964 | 变压器的规定 | Regulations for transductors |
| DIN VDE 0536-1977 | 油浸式变压器加载指南 | Loading guide for oil-immersed transformers |
| DIN VDE 0552-1969 | 装有可在绕线方向横向移动集电器的可调无线电变压器的规范 | Specifications for variable-ratio transformers having current collectors which are moved transversely in the direction of the windings |
| DIN VDE | 电压1kV以上的交流电开关装置和控制装置.变压器电路用溶断体选用指南 | A.c. switchgear and controlgear for voltages above 1 kV; application guide for the selection of fuse-links for transformer circuits |
| 编号 | 中文名称 |
青岛恒丰友电气隶属于恒丰帅集团，是一家专业从事电力配电产品生产制造销售的专业化电气公司，主要从事配电变压器、、等生产及化销售。恒丰友电气具备多年为欧美、中东客户提供服务的经验。同时可提供变压器铁芯、变压器线圈、变压器外壳的定制生产。如果您有电力变压器需求，非常期待与您的合作。/"> ；；WhatsApp：+86
