纸管纸表面脱皮有哪些原因

1、装备起因
纸管切割机假如呈现成绩，那么切割出来的纸管就会呈现这些景象，包含每个工位的压力、张力、速率等参数，切割机的刀具、纸管切割的长度等也会影响。假如是这些起因形成的不能阐明纸管有存在成绩。
2、操纵起因
过细的操纵有能有效防止呈现如许的情形，当时检讨确认抉择纸管、粘贴薄膜的伎俩等方面停止标准操纵，纸管的直线度、恰当增加纸管的壁厚等。也是不能疏忽的事项。
3、品质起因
当呈现品质成绩的话，就须要剖析起因跟检讨了，比方织物在染缸内的折叠、挤压、或许起落温速率过快，应用纸质资料、胶水、增加剂等不达标、制造工艺不尺度等形成的纸管自身品质成绩。

1, equipment reasons
If there is a problem with the paper pipe cutter, these phenomena will occur in the cut paper pipe, including the pressure, tension, speed and other parameters of each work position, the cutter of the cutter, and the length of the paper pipe cutting will also affect. If these causes are caused, it does not mean that there is a problem with the paper pipe.
2, operating reasons
Careful operation can effectively avoid such a situation, check in advance to confirm the selection of paper tubes, paste the film and other aspects of the standard operation, paper tube straightness, appropriate increase paper tube wall thickness. It is also a matter that can not be ignored.
3, quality reasons
When quality problems arise, it is necessary to analyze the reasons and check, such as the folding, squeezing, or excessive rate of temperature rise and cooling of the fabric in the dye tank. Paper tube quality problems caused by the use of paper materials, glue, additives, etc., which are not up to standard and the production process is not standard.