E40 7006-53-1 Anti-accidental electric shock gauge
E40 lamp holder and holder gauge technical standard: GB 1483.1-2008; IEC 60061-3:2004
Gauge for inspecting finished lamps with E40 caps against accidental contact
The plunger of the gauge is shown in the test position. When the plunger is at rest, surface W shall be retracted deeper than surface V.
| Reference | Dimension(mm) | Tolerance(mm) | Reference | Dimension | Tolerance |
| D | 39.6 | +0.0/-0.02 | P | 21 | ±0.1 |
| F | 40.2 | +0.05/-0.0 | Q | 32 | ±0.1 |
| G | 44 | +0.05/-0.0 | R | Approx.25 | |
| H | 22 | ±0.1 | U | 12 | ±0.1 |
| M | 50.4 | ±0.1 | r | 4.5 | +0.5/-0.0 |
| N | 51.4 | +0.0/-0.02 | α | 35° | ±30′ |
E40 7006-53-1 Anti-accidental electric shock gauge
Purpose:
To check protection against accidental contact during insertion of caps E27 on finished lamps.
E40 7006-53-1 Anti-accidental electric shock gauge
Testing :
The shape of the lamp with regard to protection against accidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
E40 7006-53-1 Anti-accidental electric shock gauge
Purpose:
To check protection against accidental contact during insertion of caps E27 on finished lamps.
E40 7006-53-1 Anti-accidental electric shock gauge
Testing :
The shape of the lamp with regard to protection against accidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
所有评论仅代表网友意见，与本站立场无关。