Hａnd Paint coating wire rod
Purpose:
Scraper stick is mainly used for research, testing and quality control, in the detection of ink, coatings, adhesives and various emulsions.Applicable substrates for RK wire rods include paper, cardboard, plastic film, metal foil, etc.
Hａnd Paint coating wire rod
K HAND COATER
Characteristic:
1.Simple, economical and easy to operate.
2.The thickness of the wet film can be from 4 to 500 microns.
3.Equipped with a special printing bed, with good reproducibility.
4.Equipped with stainless steel and wire for K bar.
5.K bars are numbered and colored.
Hａnd Paint coating wire rod
USES:
Coating of paper, paperboard, plastic film, foil, sheet metal, glass and wood.
Quick inspection of ink quality.
Parameter:
| Rod No | Explain |
| 0 | K Bar short wire rod No. 0 White/4 microns |
| 1 | K Bar short wire rod No. 1 Yellow/6 microns |
| 2 | K Bar short wire rod No. 2 Red/12 microns |
| 3 | K Bar short wire rod No. 3 Green/24 microns |
| 4 | K Bar short wire rod No. 4 Black/40 microns |
| 5 | K Bar short wire rod No. 5 Horn/50 microns |
| 6 | K Bar short wire rod No. 6 Orange/60 microns |
| 7 | K Bar short wire rod No. 7 Brown/80 microns |
| 8 | K Bar short wire rod No. 8 Blue/100 microns |
| 9 | K Bar short wire rod No. 9 Tank/125 microns |
| Total length: 24.5cm;Coating width: 14cm;Diameter of 0.3cm;Some specifications are 0.9cm in diameter. | |
| 0 | K Bar long wire rod No. 0 White/4 microns |
| 1 | K Bar long wire rod No. 1 Yellow/6 microns |
| 2 | K Bar long wire rod No. 2 Red/12 microns |
| 3 | K Bar long wire rod No. 3 Green/24 microns |
| 4 | K Bar long wire rod No. 4 Black/40 microns |
| 5 | K Bar long wire rod No. 5 Horn/50 microns |
| 6 | K Bar long wire rod No. 6 Orange/60 microns |
| 7 | K Bar long wire rod No. 7 Brown/80 microns |
| 8 | K Bar long wire rod No. 8 Blue/100 microns |
| 9 | K Bar long wire rod No. 9 Tank/125 microns |
| Total length: 37.5cm;Coating width: 25.5cm;All were 0.9cm in diameter. |
所有评论仅代表网友意见，与本站立场无关。