LR-MQ-500E Terminal Section Analyzer

Introduction

This wire harness terminal profile analyzer adopts seven-inch touch screen interface to intelligently cut and grind, ensuring the smoothness of cutting and grinding, and greatly reducing the error and time of personnel operation. Only need to input product diameter, one key cutting grinding.

Features:

1. Use linear guide rail to ensure installation accuracy.
2. The motor adopts horizontal installation to ensure small swing of rotation.
3. Laser infrared counterpoint ensures fast alignment of cutting position.
4. Optional XY mobile working platform with 360 degree rotating table, convenient terminal section sampling.
5. Add drainage system, easy to clean the machine.
6. Fixture front, easy to install and adjust.
7. Trigger switch to ensure personnel safety.
8. Velcro sandpaper, quick replacement.
9. Adopt 5 million pixel industrial camera, which can collect hd dynamic pictures.
10. Built-in measurement standard analysis software, fast report export.
11. Use seven-inch touch system, intelligent cutting program
12. Up to 30 groups of programs saved
13. Add button operation and prolong service life.

LR-MQ-500E Terminal Section Analyzer

1. Main technical indicators
2. Main technical indicators
3. Cutting module

Wire diameter range: (ø 0.10mm – ø 20.00mm including terminal)

Speed: 2800 RPM

Cutting speed: automatically adjustable

Cutting wheel: φ105 x 0.5 xφ16mm

2. Polish the module

Speed: 1400 RPM

Z fine tuning range: 0.0mm to 20.0mm (automatically adjustable)

Velcro abrasive paper: Diameter 100mm 1000# 2000# 3000# (optional)

3. Corroded part

Professional terminal section cleaning liquid

Corrosion time: 5 to 30 SEC

4. Picture intake and analysis

5 megapixel industrial camera

High quality, low distortion stuck lens

Standard magnification: about 36-230x (can be digitally enlarged to 500X)

Objective lens intertooth multiples: 0.7x,1x, 2x, 3X, 4x, 4.5x

Ultra bright white LED light source adjustable control

5. Analysis and archiving

V3.2 version of the measurement software, including compression ratio, such as enhanced measurement tools.

6, the power supply

230 VAC, 50Hz, 600 w

7. Volume and weight

Weight: about 30 kg

Volume: 500mm (l) x 350mm (W) x 350mm (H)

8. Software Functions:

Compression ratio, number of wire harness, crimping height, crimping width, sectional area, support height, support Angle, burr width, burr height, etc

LR-MQ-500E Terminal Section Analyzer

Ii. Standard equipment configuration

1. One automatic cutting and grinding machine

25 million industrial camera 1 set

3. One set of 0.7x-4.5x variable industrial lens with megapixel grade
4. 1 set of adjustable bracket
5. LED adjustable surface light 1 set
6. One special fixture for terminals

7.105*0.5mm ultra-thin imported cutting pieces 5 pieces

30 pieces of Velcro abrasive paper

9.250ml One bottle of special cleaning solution for end face corrosion

10. 5 packs of clean cotton swabs
11. One set of special measuring software for terminal section analysis
12. High precision optical glass correction block 1 piece
13. Replace 2 spanners for cutting pieces
14. One stainless steel scrap collection plate
15. Remove dust with a small brush
16. One software manual
17. Several terminal industry standards (electronic version)