增壓壓床特點
沒有油壓系統待機時,所產生之噪音,可節省電力消耗,降低成本;
利用氣、油增壓原理,達到作動速度快,高出力的要求;
出力之調整容易,只需調整氣壓壓力,就能達到需要之壓力,簡單方便;
機台結構堅固,操作容易,輕巧方便,符合工作效率;
多功能用途適用於壓入、沖孔、鉚合、裝配、切斷等;
柱式門型開放空間設計,特殊規格之需求,可接受訂制;
增壓壓床出力有1-50T供選擇;
可選配工作桌.外型尺寸:寬700×深600×高780(mm);
安全設計周全,雙手操作,設有緊急按鈕及手動增壓,方便模具安裝及正;
1. Motivated by compressed air, no noise, no pollution, and environmental friendly.
2. When the machine is in waiting status, there is no noise, which can reduce electricity consumption and cost.
3. Utilized air-oil pressurizing principle to reach fast action and high output power.
4. The output power can be easily adjusted by simply adjusting the air pressure to get the desired pressure.
5. The platen is firmly constructed and convenient for operation, which will improve working efficiency.
6. Multi-function and multi-application of this machine, such as pressing, punching, riveting, assembling, and cutting etc.
7. Column and door type open space design can meet the requirement of special specification order.
8. The output power of this machine ranges from 1~50 tons.
9. The dimension of the working platen are: width 700×depth 600 ×height 780 (mm)
10. The design fully considers safety factors. It fits two-hand operation. The safety instruction and manual boosting facilitate the installation and calibration of the moulds.
所有评论仅代表网友意见,与本站立场无关。