6013burkert高密封用于气体的电磁阀burkert 6013的详细资料

burkert高密封用于气体的电磁阀burkert 6013 Valve 6013 is a direct-acting plunger valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness.burkert高密封用于气体的电磁阀burkert 6013 Various seal material combinations are available depending on the application. A Bürkert-specifi c fl ange design (SFB) enables space-saving arrangement of valves on a manifold.

特点：

1. 直动式和紧凑型阀DN6.0
2. 防震线圈系统
3. 增加密封性具有焊接柱塞导向管
4. 防爆版本
5. 节能脉冲版本

参数：

 Body material
 Type 6013
 Type 6013 A
Brass, stainless steel 1.4305
Brass, stainless steel 1.4305
Seal material FKM, PTFE/Graphite (EPDM on request)
Analysis version

Type 6013 A
Silicon, oil and fat free version
Tightness <10-4 mbar l/s
Limit value for risidual carbon
Type 6013 A <0.2 mg/dm²
Medium
 Type 6013
 Type 6013 A
• Technical vacuum
• Neutral gases and liquids
 (e.g. compressed air, water, hydraulic oil)

• Neutral medium, which does not attack the body
 ａnd seal materials (see chemical resistance chart)
Medium temperature
 FKM
 PTFE/Graphite
 FKM, Circuit function B
-10 to +100 °C (PA coil) till 120ºC (Epoxy coil)
-40 to +180 °C (see chemical resistance chart)
-10 to 100°C (AC) -10 to 120°C (DC)
Ambient temperature Max. +55 °C
Viscosity Max. 21 mm²/s
Port connection
 Type 6013
 Type 6013 A

G1/8, G1/4, G3/8, sub-base (SFB)
G1/8, G1/4
Operating voltage
 Type 6013
 Type 6013 A
24 V DC, 24 V/50 Hz, 230 V / 50 Hz
24 V DC, 230 V / 50 Hz (other voltages on request)
Voltage tolerance ± 10%
Duty cycle/single valve
 With block assembly on manifold
99% continuous rating
Intermittent operation 60% (30 min) or with 5 W coil 

示意图：