LR-F018 PSTC 6 Rolling Ball Tack Tester
Test principle
PSTC 6 Rolling Ball Tack Tester adopted the inclined plane rolling ball method and the inclined groove rolling ball method of method B:
Method A: the adhesion of the adhesive tape to the steel ball when A short contact occurs between the steel ball and the adhesive surface of the pressure-sensitive adhesive tape sample at A small pressure
To test the initial viscosity of the sample.Roll a steel ball across the sticky surface of the adhesive tape on the inclined plate, according to the specified length of the sticky surface
The maximum size of steel ball that can be stuck, and evaluate its initial viscosity.
Method B: roll a steel ball of specified size through the inclined groove and measure the rolling distance on the sticky surface of the adhesive strip on the horizontal plate to evaluate the initial viscosity.
LR-F018 PSTC 6 Rolling Ball Tack Tester
Application:rolling ball tack tester is suitable for the initial viscosity test of all kinds of adhesive products, such as pressure sensitive tape, medical patch, adhesive label, protective film, etc
LR-F018 PSTC 6 Rolling Ball Tack Tester
Specification
| Adjustable Angle | 0 ～ 60° |
| Table width | 120 mm |
| Test area width | 80 |
| Standard steel ball | 1/29-1 inch |
| Outside size | 320 mm (L) × 140 mm (W) × 180 mm (H) |
| Weight | 13 kg |
所有评论仅代表网友意见，与本站立场无关。