专业销售立可溶AQUASOL水溶胶带-北京恒远安诺科技有限公司

专业销售立可溶AQUASOL水溶胶带

产品名称	型号	厚度	规格	包装
水溶纸	ASW-35/S-11	0.09mm	*22cm28cm**	500张/盒
水溶纸	ASW-35/S-14	0.09mm	*22cm36cm**	500张/盒
水溶纸	ASW-35/S-22	0.09mm	*43cm56cm**	500张/盒
水溶纸	ASW-35/R-9	0.09mm	*23cm50m**	4卷/箱
水溶纸	ASW-35/R-15	0.09mm	*39cm50m**	4卷/箱
水溶纸	ASW-40C/R-20.5	0.12mm	*52cm50m**	4卷/箱
水溶纸	ASW-60/S-22	0.20mm	*39cm56cm**	250张/盒
水溶纸	ASW-60/R-15	0.20mm	*39cm50m**	4卷/箱
水溶纸	ASW-60/R-31	0.20mm	*79cm50m**	4卷/箱
水溶胶带	ASW1"/ASWT1	N/A	*2.5cm92m**	24卷/箱
水溶胶带	ASW2"/ASWT2	N/A	*5cm92m**	12卷/箱

水溶纸使用说明：

Step 1: Clean area to be welded. 对需焊接区域进行清洁。
用毛刷对焊接区域进行清洁。	Clean area to be welded with wire brush.	使用EZ Wipes®清洁布擦拭焊接区域。	Wipe area with a saturated cloth - such as EZ Wipes® by Aquasol. Wait approximately two minutes for cleaning agents to evaporate.	使用EZ Wipes®清洁布粗糙面擦拭管道表面干燥污染物，用光滑面抛光焊接区域表面。	EZ Wipes® feature a two-sided cleaning fabric, an abrasive side to loosen dried on surface contaminants, and a smooth side to reveal a cleaner, polished surface.
Step 2: Construct Dam. 构建保护层。
将水溶纸贴压在管道内径上印出压痕。	Trace the pipe's inner diameter on the paper by pressing against the pipe to create an impression of the pipe.	将水溶纸剪成直径为管道内径1.3倍的圆形。	Cut Aquasol® Paper into a circle with a diameter about 1.3 times the inner diameter of the pipe.	将纸边缘剪开约2.5cm至5cm,不要超过内径。	Slit approximately 1" to 2" segments perpendicular to impression on paper. Do not exceed inner diameter circle.
Step 3: Insert Dam and tape in place. 使用胶带将水溶纸贴在适当位置。
将水溶纸圆片放入离焊缝约15cm至20cm的位置。	Insert dam 6-8" from root gap with the lip toward the weld preparation	用水溶胶带将水溶纸粘贴在管道内。	Tape dam in place.	重复第2步,用水溶纸和水溶胶带将管道另一侧封堵。	Repeat Step 2. Insert and tape dam on opposite pipe.
Step 4: Introduce gas and weld. 充入氩气进行焊接。
用EZ Zone™铝箔胶带粘住焊缝，避免空气流动。	Cover root gap with EZ Zone™ Tape, a contaminant-free gas retaining tape.	将助焊气体通过软管从焊缝输入。	Insert purge gas needle into root gap. Ensure connection to gas line.	充入氩气开始焊接。	Introduce noble gas and start welding.
Step 5: Dissolve Aquasol® Water Soluble Purge Dam. 冲洗管道。
用水冲洗，水溶纸立刻溶解。	Dissolve Aquasol® Water Soluble Purge Dam.